Secure Wall Controller

The Z-Wave.Me Wall Controller is a Z-Wave device that can both control other Z-Wave devices and activate predefined scenes in an IP gateway. Although it is controlling other devices, the Wall Controller cannot act as Z-Wave network controller (primary or secondary) and will always need a Z-Wave network controller to be included into a Z-Wave network. The device can be used in different modes that are selected by configuration parameters: 

  1. Control of groups of other Z-Wave devices using 'ON', 'OFF' and Dim commands.
  2. Activation of predefined scenes in Gateways or other Z-Wave devices.

The wall controller must be completed by a mounting frame, the wall switch frame and a rocker. They are not scope of delivery of this device. This device support secure communication when included by a controller that also supports secure communication. The device will then send all commands as secure commands unless the receiving device can not accept them. Then the command is send the normal way automatically. The device will be completed with different designs of wall frame and rockers.

The device will fit into the following wall switch series.

Type 1:

  • Busch-Jaeger (DURO 2000, Reflex SI)
  • Kopp (HK05, HK07, Paris)
  • REV (Everlux, Arcada)

Type 2 (DW7, SW7):

  • Gira (55 Standard, S55 E2, S55 Event, S55 Esprit, S55 Klassix)
  • Jung (AS 500)
  • Berker (S.1 B.3, B.7)
  • Hager (kalysto pur, kalysto art, kalysto stil)
  • Merten (1M, Atelier M, M-Smart, M-Pure, M-Pure-Decor, M-Plan I, M-Plan II)
  • Popp (Forever, Arcada)
  • Peha (Badora)
  • Legrand (Creo)

Please note that you need to keep the original frames of the switching systems mentioned above. the system 55 rockers will fit in.

More information and external links:




The new RaZberry Controller Software Version 2.2 now comes with own App Store. Check out more details here or you straight to the RaZberry Home Page.